BetaFPV Meteor65 Pro Bind 'n 'Fly ELRS
A beast of a micro quad spinning 35mm props on a 1S battery with a 25-350mW video transmitter and builtin ELRS 2.4 for control. A lot to pack into a 65mm wheelbase!
The Meteor65 Pro frame has the same perfect performance as the popular Meteor65. The lightest low profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
Speaking of batteries, the Meteor Pro uses the BT2.0 connector. BT2.0 reduces the internal resistance of the connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst) while PH2.0 just supports 4.5A. This means stronger power and longer flight time on 1S brushless drones. More fun, les sag!
Weight: 22.0g (without battery)
FC&ESC: F4 1S 5A FC (ELRS 2.4G)
Frame: Meteor65 Pro 65mm 1S Brushless Frame
Motors: 0802SE 19500KV Motor
Props: 35mm 3-blade props (1.0mm Shaft)
Camera: C02 Micro Camera
VTX: M03 25-350mW VTX
Canopy: Canopy for Micro Camera
Battery: BT2.0 300mah 1S Battery
Flight time: 4 minutes
0802SE 19500KV Motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.83g/pc but also ensuring the awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.
- 1x Meteor65 Pro Brushless Whoop Quadcopter
- 2x 300mAh 1S 30C Battery with BT2.0 connector
- 1x BT2.0 Battery Charger and Voltage Tester
- 1x TypeC USB cable
- 1x Customized Carry Case
- 4x Spare 35mm 3-blade props (1.0mm Shaft)
- 1x Screwdriver