If you fly with different groups and in different situations you'll probably find yourself swapping out your VTx pretty regularly. 25mW for some race meets, 200mW for others then when you want to get you Speeder Bike on through the trees you need all the power you have.
Save all the faffing with cable ties and connectors with the FT48X. 25, 200 and 600mW in a single VTx and switchable at the press of a button. Plus it's has all the channels (including Raceband, a 5v DC output to power your camera and a built in microphone.
There's even a super lower power mode at 0.25mW (basically off!) for when you're powered up on the bench and don't want your VTx heating up needlessly.
A short press of the button changes channel, a 2 second press changes band and a 5 second press changes power output.
|Video Format||PAL / NTSC (Auto)|
|Output Impedance||50 Ohm|
|Output Power||0.25mW (aka OFF!)||
|Operating Temperature||-10~ 85°C|
|Video Band Width||0~8.0 MHz|
|Audio carrier Frequency||6.5 MHz|
|Video Input Level||0.8~1.2 Vp-p|
|Audio Input Level||0.5~2.0 Vp-p|
|Audio Input Impedance||10K Ohm|
|Antenna Connector||90º SMA|
Never use a VTx without the correct antenna attached! Please note: This uses the same connect as the FX range of transmitters, the pins are in a different order - Do not just swap VTx.