Matek F405-AIO Flight Controller with PDB and OSD

  • Sale
  • £33.99

The Matek F405-AIO is an all-in-one board including an F4 flight controller, a power distribution board and an OSD. It's layout makes it easy to wire up the other components of the quad keeping the build neat and tidy. 


  • High performance F4 (STM32F405) Processor
  • ICM20602 gyro
  • Micro SD card slot for Blackbox logging
  • Matek405 Betaflight target
  • 32K Gyro update & 16K PID Loop
  • Integrated OSD configured through the Betaflight Configurator
  • Integrated 200A current meter to monitor the real-time power consumption 
  • Dual BEC 5v at 2 Amps and 9v at 2 Amps
  • Adjust the PIDs by OSD using your radio
  • Adjust the VTX settings (IRC Tramp and TBS Unify)  
  • 3-6s Lipo support
  • Net weight: 12g
  • Size: 36x51mm PCB with XT60 socket
  • Standard 30.5*30.5mm mounting holes
  • 3.3V output for Spektrum Rx's


  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT 1200 compatible)
  • 1x pair I2C1 pads (for INAV firmware only)
  • 1x Side-press button for BOOT(DFU) mode


    • Vibration isolations mounts
    • Shelf to add other items to your stack e.g. your Rx
    • Rubycon Low ESR 35v 470uF capacitor

    Board Layout: 

    If you are looking for help and support try the F405 Facebook group

    Customer Reviews

    Based on 1 review Write a review