Halo RC

Halo RC Nemesis Base Frame Kit

  • Sale
  • £35


The Nemesis from Halo RC is a lightweight modular frame, designed primarily for FPV racing. Currently available in a True X 210 5 inch kit, with either 14mm or 8mm wide arms. Weighing between 65g and 75g depending on how you build it, superior durability is achieved by the unique way all 4 arms connect.

When thinking about the needs of a race frame and discussing the requirements with some of the top racers in the world, Halo RC came to some conclusions;

Racers are about as diverse as it gets when it comes to what they want from a race frame. So it was important to accommodate as many configurations as possible. This has resulted in a very comprehensive feature set, all whilst staying light, strong and durable. The option to carry an HD camera, a full-size FPV camera or a micro, to use a variety of VTx and Rx antennas and the option to run either 30.5mm or 20mm stacks up to 5 boards high. With all the combinations of components, Halo RC chose to design a frame that is modular - areas of the frame can be fitted with a range of parts that are specifically designed for the components they interact with.

Top Plate & Canopy Options

Halo RC opted for a design that uses a top plate and standoffs. This is a tried and tested design that offers a lot of extra strength and rigidity to the whole frame. The top plate is also a perfect base for attaching a TPU mount to hold an HD camera while remaining lightweight when not. The top plate is also designed so that you can run the battery top mounted 'Toilet Tank' style... across the roll axis rather than the pitch.

Base Kit Contents:

  • 4 x 16mm Steel Bolts
  • 4 x 12mm Steel Bolts
  • 4 x M3 Steel Clinch Nuts
  • 4 x 4mm Arms
  • 1 x 2mm Top Plate
  • 1 x 1.5mm Middle Plate
  • 1 x 1.5mm Bottom Plate

Mix & Match to Make It Yours:

There is also an awesome canopy design that replaces the top plate and has camera and  VTx antenna mounting options built in. A huge amount of design and testing went into this and the end result is as gorgeous as it is functional. The canopy is not as rigid as carbon fibre but the way we have designed it makes it as rigid as a TPU canopy could be on this frame. This option is not as strong as running a top plate and standoffs but a lot of racers really like the look and aerodynamic benefits it might offer.

Camera & Antenna Mount Options:

The next modular section of the frame is the VTX and RX antenna mounts. We have designed mounts that hold a dipole, an Axii U.fl, or a standard SMA/Unify connector. You can also use antenna tubes or an Immortal T mount depending on whether you use SBUS or Crossfire.

Want to print your own parts?

All the TPU modular parts are available to download and print yourself - We'll send you a download link on request. When a new antenna or camera is released it will be easy to design or adapt a mount to fit this frame, in essence, future-proofing these areas.

No 3D Printer?

For those without a 3D printer, we have a couple of TPU parts in stock to get you up and running, you can find them here.

The full range of TPU parts are available to purchase from the best 3D print shop in the UK, Multi-Rotor Spares. They have a huge selection of colours and their print quality is excellent.